Welding Positioner can be used at automatic welding or manual welding, such as pipe horizontal welding, tube end welding, axle, tray and barrel, it can be wildly used in the pressure vessels equipment, metallurgy, electric power,  chemical machine etc industry.The maintenance regulations of welding positioner can be divided into two parts, one is the daily maintenance regulations, the other is the first level maintenance regulations, and the specific contents are as follows.

1. Daily maintenance regulations

(1) After welding the workpiece each time, the welding slag on the worktable should be removed in time.

(2) Before each use of the equipment, the rotating gear, turnover gear and cable should be inspected. If there is dirt on the rotating gear and turnover gear, it should be removed in time. If the cable has problems such as broken skin, fracture or poor contact, it should be repaired in time. If it cannot be repaired, it should be replaced. In addition, it is necessary to lubricate the rotating gear and turnover gear, and add proper lubricating oil, not excessive.

(3) When the work is finished, fill in the records for future reference.

2. Primary maintenance regulations

(1) Check the distribution box, if there is dust, then it should be removed in time, and check whether the terminal is firm, if there is loose, it should be tightened in time.

(2) The bearing should be replaced in time, if there is any abnormal noise.

(3) Check whether the lubricating oil is sufficient and the quality is good.