5 Axis CNC Flame Plasma Cutting Machine Q235 Material For Steel Pipes Fabrication-CNC Plasma&Flame Cuttting Machine-MISA WELDING & CUTTING AUTOMATION CO., LIMITED-

5 Axis CNC Flame Plasma Cutting Machine Q235 Material For Steel Pipes Fabrication

Brief Description:

CNC 50-800 series numerical control pipe intersecting line cutting machine is a kind of equipment for automatic calculation and cut off at the end of steel pipe. The machine can be widely used in shipbuilding, construction, petrochemical, machinery, metallurgy and other industries of the pipeline structure cutting process. There are a large number of pipes with intersecting line hole, intersecting line ends in these industries, also commonly known as "small shrimp section" of the elbow; this kind of processing in most production is using making sample, marking, manual lofting, manual cutting, manual polishing backward, complicated method. QGVI series CNC pipe cutting machine produced in our factory is very convenient to cut such artifacts, and workers without programming, only need to input the matched radius and the intersection angle parameters of the tube, the machine will automatically cut the pipe intersecting lines and intersecting holes, and the welding groove, does not need manual polishing.

Kindly Noted:

1. Diameter from 50-2600mm, others size please confirmed with us.
2. One set of welding turning rolls include one drive & one idler, also customer can choose other combinations.
3. Voltage standard is 380V , 50HZ , 3PH. Other voltage please kindly let us know.
4. Control panel is wired control ,or you can choose wireless control.
5. If customers need more special requirements ,we’ll study with our engineer.
6. Color of the machine is according to the customers.

Technical Parameters:

No.	cnc pipe cutting machine	Parameters
1	Cutting diameter	1. Φ= round : 50mm~800mm , 2. Effective cutting length 12m 3. or as required
2	Cutting method	Plasma / Flame
3	Plasma power brand	Hypertherm 105A/125A/200A
5	Plasma cutting wall thickness (quality cutting thickness)	According to plasma power source
6	Flame cutting wall thickness	1.Vertical cutting 6-60mm 2.Beveling cutting 6-40mm
7	Plasma cutting thickness	HPR 105A 1.vertial cutting 1-20mm 2.beveling cutting 6-14mm 3.cutting thickness depand on the plasma power
8	Plasma cutting thickness	≤25
9	Requirements of the workpiece ovality	≤1%
10	Cutting speed	10~2000mm/min
11	Move speed	10~6000 mm/min
12	Axial swing angle of cutting torch	α=±45°
13	For maximum weight cut tube	5000Kg to 7500kg

Brand using:

﹡ Software is made by HELIDIGI
﹡ Servo Motor Brand is Panasonic
﹡ Electrical Element is made by Schneider /Siemens
﹡ Wireless Control box is made by Taiwan by Yuding
﹡ Bearing is made by NTN / Harbin
﹡ Gearbox is made by Neugart
﹡ Plasma Power source is made by Hypertherm
﹡ Cutting Torch is made by Messer