Delivery Of Ten Welding Rotator
In the warm spring, flowers are coming out with a rush.; a good opportunity.After two 100t welding rotator were delivered, another 10 self-adjusting welding rotator were delivered. After comparison and communication with several suppliers in the early stage, the manufacturer who ordered the welding rotator finally decided to adopt MISA products.
MISA WELDING(WUXI)Co;Ltd has been commited to the development and production of welding products,and now the products have been sold all over the world.
Welding and positioning equipment is suitable for mang fields. Such as Oceanic Engineering, Pressure Vessel, Pipe Manufacturing, Wind Power Fabrication and so on.
Welding rotator is a common welding auxiliary device, which is widely used in the welding production process. It mainly uses the friction between the weldment and the active roller to drive the cylindrical weldment to rotate. It can realize the automatic welding of the inner and outer circumferential seam, fillet weld and inner and outer longitudinal seam of the weldment by combining with the welding manipulator and welding positioner.
The welding rotator is relatively simple in actual operation, and its characteristics are relatively stable. Moreover, the welding rotator of MISA is all manufactured according to the requirements of the manufacturer, so the comprehensiveness of actual operation is much better, and the professional ability is more stable, and the service life is longer.Welding rotator is divided into many types, the common types of rotator are adjustable welding rotator and self-adjusting welding rotator. There are different models of adjustable welding rotator and self-adjusting welding rotator. Each rotator has different size, shape, bearing capacity and application field. The advantage of adjustable welding rotator is that the center distance of roller can be adjusted by reserving screw hole or lead screw to adapt to the change of workpiece diameter. The drive adopts cycloid pin gear reducer or worm gear reducer and is driven by double motors.
Now let's take a look at the advantages of welding rotator. The welding rotator uses the manual control box to control the start 、stop、forward and reverse rotation of the equipment, which is very convenient to operate. The welding rotator adopts the structure of separating the driving frame and the driven frame, which can adapt to any length of workpiece. The pipe welding rotator is driven by constant torque variable frequency control motor. In this way, the speed adjustment of the equipment becomes wider, and the load capacity is strong, and the low-speed stability is good. The design of polyurethane roller increases the friction between roller and workpiece.
When operating the welding rotator, the operator must be familiar with the basic structure and performance of the machine, reasonably select the scope of application, master the operation and maintenance, and understand the electrical safety knowledge. When the cylinder is placed on the rotator, it is necessary to check whether the center line of the tugboat is parallel to the center line of the cylinder, so as to ensure that the tugboat and the cylinder are evenly worn. Adjust the center focal length of the two groups of tugs to 60 degrees ± 5 degrees with the center of the cylinder. If the cylinder is too heavy, a protective device should be added to prevent the cylinder from running out when it rotates. The adjustment of the welding turning rolls must be carried out when the machine is stationary. When starting the motor, first close the two pole switch in the control box, connect the power supply, then press the "forward" or "reverse" button according to the welding requirements, and press the "stop" button when it needs to stop. If you need to change the direction of rotation in the middle, you should first press the "stop" button to adjust the direction, and turn on the power supply of the speed control box. The speed of the motor is controlled by the speed control knob in the control box.